Tilemaster - Decorative vinyl & LVTs

TILEMASTER’s Super Flow 30 reportedly provides the ‘ideal top surface finish’ for LVT installations. The ultra-rapid setting leveller is said to be suitable for all substrates – including timber and underfloor heating – and provides superior flow and adhesion, with a working time of 15 minutes.

Its constant ‘glass-like’ finish is said to eliminate subfloor distortion through to the vinyl surface and its reportedly ultra-rapid setting properties mean finished flooring can be laid after 90 minutes.

Super Flow 30 is said to be a two-part, bag/bottle system which has a low-odour, protein-free formulation and is moisture tolerant. It can be applied directly to a DPM in 24 hours, without priming, and over old adhesive residues and flooring grade asphalt/bitumen. It can also be used as a primer-less system and to pre-smooth prior to applying a DPM.

Where projects require a DPM, Tilemaster offers a complimentary fast-track system - FAST One Coat DPM - which is said to cure in between four to five hours.

The solvent-free, epoxy-based product is a two-part membrane, which can also be used with underfloor heating and on surfaces with a relative humidity of up to 98%; where no structural DPM is present and on anhydrite screeds with relative humidity of up to 87%.

Tilemaster says it creates a smooth, glossy surface that compliments Super Flow 30’s features, and is resistant to water, grease, oil, dilute mineral and organic acids.
01772 456831