Tilemaster Adhesives - matting

TILEMASTER Adhesives’ range includes two floor preparation products that are suitable for use in entrances and walkways, prior to installing all types of entrance matting - from synthetic to stainless steel, in exterior and interior entrances and circulation areas. Tilemaster Super Flow 30 is a two-part self-levelling and smoothing compound, onto which entrance matting can reportedly be installed after 90 minutes. Tilemaster FAST One Coat DPM is a fast curing two-component epoxy DPM for use when installing onto green screeds, or where there is a need to control rising moisture/damp from the substrate below. In tandem, the products offer what Tilemaster Adhesives calls the ‘Fast Track System’.

Tilemaster Super Flow 30 is said to be ultra-rapid drying, protein-free and feature advanced binder system technology, for superior flow and self-levelling. It reportedly provides an exceptional surface finish and is suitable for a wide variety of substrates - from concrete to timber. The company says it can be applied from depths of 2mm - 15mm in one application and can accept light foot traffic after 30 minutes.  Tilemaster Super Flow 30 can also reportedly be used to pre-smooth before installing Tilemaster FAST One Coat DPM and it can be applied over old adhesive residues, including bitumen.  It can also be applied directly to a liquid DPM, amongst other substrates, without the need to prime, the company says.

Tilemaster FAST One Coat DPM can be applied to substrates with a relative humidity reading of up to 98% and is fast curing; smoothing compounds can be applied after 4 – 5 hours. When no substrate DPM is present, the product can reportedly be utilised as a constructional DPM when applied at a suitable thickness.

The Tilemaster ‘Fast Track System’ is said to allow for pre-smoothing of the substrate, DPM installation and application of the final smoothing layer in as little as seven hours, enabling project completion within one day, or during a single overnight installation.

Tilemaster Super Flow 30 and FAST One Coat DPM form part of what Tilemaster calls a comprehensive product range, including tile adhesives, grouts, and self-levelling and smoothing compounds.  All products are reportedly manufactured in Leyland, Lancashire - in accordance with current EU legislation and are offered alongside advice from Tilemaster’s technical support team.  01772 456831