WITH BAL, you’re installing with confidence, says the company.
When tiling in the heat, you want tile adhesives that give you longer open and working times – without compromising on quality and the ability to complete your projects on time and on budget.

Says the company, ‘With BAL Rapid-Flex One you’re installing the easiest to use rapid-set adhesive – suitable for all tiles types – even large 3mx1m large format panels, making it the universal choice for all tiling jobs.

‘For certainty when installing, you keep control with 2x longer working times (potlife) than most rapid-sets. With 60 minutes in the bucket, the adhesive will last longer when mixed. This means you can confidently have bigger mixes for speed and suffer less waste.

‘BAL Rapid-Flex One also provides 3x longer open time than most rapid-sets. With 30 minutes on the floor before skinning over, this gives you longer to move and set your floor tiles – especially when you’re working with large format panels.

‘With BAL Rapid-Flex One, you can rely on set-time as well. Ready to grout in just three hours, you can get the job completed faster.’

Continues BAL, ‘Formulated in the UK, with the UK conditions in mind, you can trust your adhesive to have consistent setting times. This means you can trust your tiles can be walked on and grouted after three hours. This ensures floors in busy commercial areas can be brought back into service for customers and other trades sooner.’

‘You’re installing satisfaction with BAL Flex One’
If you want a little bit more open and working time, yet still be grouting the same day, then you can fix with BAL Flex One, says the company.

‘With BAL Flex One, you get extended pot life of 2.5 hours and extended open time of 45 minutes – while still being able to grout in 6-8 hours. This means less wastage, while giving you more time to fix larger format tiles and complex designs – without worrying about the product going off in the bucket or skinning over on walls or floors.

‘Our formulations are developed and tested by our UK R&D team, specifically for UK site conditions. So with BAL Flex One, you are installing an adhesive you can rely on. When we state a setting time of 6-8 hours, you can rely on this every time. This means you know you can get on with grouting the next day with no surprises, or risk of efflorescence, or patchy grout.’

‘With BAL Flex One, you can trust in its performance’
BAL Flex One sticks to most substrates and can be used with most tile types including porcelain, ceramic and non-moisture sensitive natural stone, continues BAL.

‘Does your gel adhesive struggle to stick to uncoupling mats? Do you have to water down your adhesive so it sticks to fleece backed systems?

‘BAL Flex One provides ultimate grip and grab and exceeds the requirements of EN 12004 for a ‘T’ rated adhesive – sticking effortlessly to any uncoupling mat system.

With S1 deformability, BAL Flex One is suitable for use with underfloor heating systems, and areas with limited movement.’
www.bal-adhesives.com