Andrew advises on ensuring compliance while achieving a high-performance,
aesthetically pleasing flooring finish
WHEN installing floorcoverings in marine and offshore environments, contractors must ensure they adhere to relevant regulations regarding conformity with product standards.
Here I’ll advise on ensuring compliance while achieving a high-performance, aesthetically pleasing flooring finish.
Among other special considerations when installing floorcoverings in marine environments, contractors must ensure smoothing compounds and adhesives meet appropriate fire safety standards for ships at sea, including low flame spread standards and low smoke toxicity.
Until recently, contractors could look for the IMO ‘wheel mark’ logo on product packaging to check compliance with International Maritime Organization (IMO) standards as well as the EU Marine Equipment Directive (MED). However, since our exit from the European Union, the UK has adopted its own corresponding regulations ‘The Merchant Shipping (Marine Equipment) Regulations 2016’ and assessment procedures. While these replicate EU law, compliance is covered by a new ‘UK conformity mark’, for marine equipment. Since 2023, all adhesives and smoothing compounds used on board UK ships must feature this.
As well as the requirement for a product to carry the IMO wheel mark or new UK conformity mark, specialist features are often required for marine and offshore environments.
Subfloor preparation
Just as when installing floorcoverings on land, contractors should make sure the subfloor is structurally sound, dry and free of any contaminants or debris. The application of a smoothing compound is recommended to create a perfectly smooth surface for floorcoverings.
A common subfloor type in crew and passenger areas on board ships is steel decking, which is liable to ‘flex’ slightly as a result of the motion of a vessel, as well foot traffic and temperature fluctuations, so any smoothing compound selected for use over this type of subfloor needs be able to cope with these movements.
F Ball’s Stopgap 1200 smoothing compound can be applied over steel subfloors and carries the wheelmark logo and UK conformity mark. It has the additional feature of being suitable for use over old adhesive residues, and when used in such applications, there is no need to prime beforehand, providing a timesaving solution in refurbishment projects.
Adhesive selection
When choosing an adhesive for marine flooring installations, factors to consider include likely exposure to water, extreme temperatures or temperature fluctuations.
Included in F Ball’s marine range, Styccobond F73 PLUS adhesive for internal and external heavy-duty applications is suitable for securing a wide range of floorcoverings, including rubber, vinyl and synthetic grass, in areas that are subject to high levels of foot traffic and surface water.
For areas where vinyl floorcoverings will be exposed to extreme temperatures or temperature fluctuations, contractors can use Styccobond F49 Hybrid PS, a temperature tolerant, pressure sensitive vinyl adhesive that creates a high-strength, water resistant bond to hold resilient floorcoverings in place across a wide range of temperature fluctuations, from as low as -20deg C up to 60deg C.
F Ball’s Styccobond F58 PLUS is a fast-drying, fibre-reinforced, pressure sensitive adhesive that is also suitable for the installation of LVT floorcoverings in marine and offshore environments. Its fast-drying formulation enables LVT tiles and planks to be secured from just five minutes following application of the adhesive.
It can also be used to install rubber floorcoverings, a popular choice on ships because they are durable, easy to maintain and often offer better grip when wet.
MED-certified adhesives for a wide range of textile floorcoverings, which also carry the UK conformity mark, are also available from F Ball, including its Styccobond F3, a popular choice for bespoke carpet installations on board luxury cruise liners, as well as the company’s Styccobond F41 carpet tile tackifier.
Compatibility check
It’s always advisable to check an adhesive is suitable for use with a particular floorcovering. To do this, flooring contractors can see F Ball’s Recommended Adhesives Guide (RAG) or consult manufacturers’ instructions. Alternatively, F Ball’s technical service department are on hand Monday to Friday, 8.30am-5pm, to answer your questions about F Ball products and how to use them.
www.f-ball.co.uk
Andrew Mees is a technical service officer at F Ball and Co
