COMMERCIAL flooring specialists, Shire Flooring, has used UltraFloor Prime IT Multi-surface Primer and Level IT Two to complete an extensive flooring project at Swanwick School and sports college.
Background
Swanwick School and sports college have extended their outstanding premises to include a new educational block. To install the various floorcoverings, flooring specialists, Shire Flooring, used UltraFloor Prime IT Multi-surface Primer and Level IT Two.
The challenge
Before levelling could commence, the team at Shire Flooring identified they’d be working on a calcium sulphate screed – a notoriously difficult substrate to work with. With that in mind, UltraFloor’s area sales manager, Mark Berry and technical training and site manager, Martin Pouncey, visited the site to carry out extensive moisture testing to ensure the moisture level was below 75% RH.
The solution
To ensure an accurate moisture reading, the laitance was grinded off the surface of the screed. Once the correct moisture levels had been achieved, priming could commence.
Formulated to promote adhesion to all UltraFloor smoothing underlayments, Prime IT Multi-surface Primer reduces pinholing, minimising the risk of costly failures. With a coverage rate of 150sq m at 3:1 dilution and a second coat at 1:1, Prime IT multi-surface Primer is a must-have product for all flooring installation projects.
After the screed had been primed and fully dried, Level IT Two was applied across the new building.
There are many reasons Level IT Two has become UltraFloor’s most popular floor leveller. Its exceptional flow characteristics make it a very easy material to apply to various subfloors in commercial and domestic flooring projects. Its low odour formulation means this fantastic all-rounder leveller is equally suited to confined areas, proving particularly popular in the education, health, and hospitality sectors.
With a set time of 2.5 hours, Level IT Two can receive bonded floorcoverings after eight hours, making it suitable for projects with a tight deadline. What’s more, because Level IT Two is available as a two component system, it takes the guesswork out of mixing, reducing site errors and guaranteeing a perfect application every time.
After just a few hours, the various floorcoverings were then installed across a number of classrooms, corridors, and toilets.
Results
The project completed on time and the pupils and staff at Swanwick School and sports college are now able to enjoy their new facilities.
To find out more about UltraFloor’s range of expert subfloor preparation materials, use the details below.
01827 254402
ultrafloor@instarmac.co.uk
www.instarmac.co.uk
