John Green elaborates on situations where it’s beneficial to apply a smoothing compound before a waterproof surface membrane and what to consider when doing this.
FLOORING contractors are used to applying a waterproof surface membrane before a smoothing compound when high subfloor relative humidity levels mean a moisture management solution is required to protect against floor failure.
However, we commonly receive questions about what to do where a moisture management solution is required, and the subfloor is particularly rough or uneven. In these situations, it’s recommended to level the subfloor beforehand to ensure even coverage of the subsequently applied waterproof surface membrane.
Contractors just need to ensure they select a moisture-tolerant smoothing compound and follow other recommended subfloor preparation processes.
Moisture management
Where subfloor relative humidity levels exceed 75% (65% if bonded wood floorcoverings will be installed), a moisture management solution will be required to prevent excess subfloor moisture attacking adhesives and damaging floorcoverings, potentially causing complete floor failure.
For this reason, F Ball recommends a moisture test is conducted as part of any flooring installation.
The usual way of suppressing excess subfloor moisture is with the application of a liquid waterproof surface membrane, such as F Ball’s Stopgap F77, to create a barrier between the subfloor and floorcoverings and adhesives, as well as subsequently applied subfloor preparation products.
In most circumstances, a liquid waterproof surface membrane can be applied directly to the subfloor once contractors have ensured it’s suitably sound and free of contaminants.
Rough or uneven subfloors
However, if the subfloor is rough or uneven, a waterproof surface membrane can pool in any undulations on the surface when applied, necessitating a greater quantity of product to achieve full coverage, adding more expense to the project. It can also result in an extended curing time where the membrane has pooled.
The application of a smoothing compound over the subfloor beforehand can avoid this and save time and cost.
However, it’s important to select a product that can be indefinitely exposed to moisture. Moisture tolerant smoothing compounds include F Ball’s Stopgap Green Bag (when mixed with Stopgap 114 liquid), Stopgap 850, Stopgap 1200 and Stopgap 1500. Stopgap 460 Exterior.
Repair compound can also be used to repair small areas of a subfloor prior to the application of the waterproof surface membrane.
Prior preparations
Following correct preparation of the substrate, it’s always recommended to prime subfloors before the application of a smoothing compound to reduce the possibility of pinholes and craters forming in the drying smoothing compound owing to air escaping from the subfloor, which can be transmitted through the waterproof surface membrane and affect the appearance of a finished installation.
Once a waterproof surface membrane has been applied and has fully cured, the flooring installation can then continue as normal. Typically, this means priming again and another application of an appropriate smoothing compound to create a suitably absorbent base for adhesives to bond to decorative floorcoverings.
Both F Ball’s Stopgap 1200 and Stopgap 1500 high-performance smoothing compounds can be applied directly over a waterproof surface membrane without priming, providing this is done within a specified time period of the waterproof surface membrane curing.
Specialist adhesives
There are also certain adhesives, including Styccobond F40, F41, F46, F58 PLUS, F49 and B95, which can be applied directly to a fully cured waterproof surface membrane, eliminating the need for another application of smoothing compound.
It’s recommended flooring contractors see manufacturer’s instructions to check the suitability of adhesives for application over particular kinds of waterproof surface membrane.
To check an adhesive is compatible with chosen floorcoverings, flooring contractors can consult F Ball’s industry-leading Recommended Adhesives Guide (RAG).
The 2025 edition of the guide lists adhesives recommended for use with over 6,000 floorcoverings, produced by more than 200 manufacturers. A continually updated version of the guide is available on F Ball’s website and as a free app. It’s also available as an A5 printed booklet.
Alternatively, F Ball’s technical service department are on hand Monday to Friday, 8.30am-5.00pm, to answer your questions about F Ball products and how to use them.
www.f-ball.co.uk
John Green is F Ball and Co technical service officer